|Grade||Genuine Rolex||AAAAA Clone||AAA Replica||A Replica|
|Movement||Rolex Calibre 3285||Genuine Swiss Clone 3285 movement||Swiss 2836 Movement||Asian 2813 Movement|
|Time Accuracy||-3/+5 sec per day COSC certified||-5/+6 sec per day COSC certified||-10/+10 sec per day COSC certified||-1/+2 min per day COSC certified|
|Stainless Steel Type||904L Stainless Steel||904L Stainless Steel||316L Stainless Steel||316L Stainless Steel|
|Bezels||Bi-directional Rotating||Bi-directional Rotating||Fixed||Fixed|
|Crystal||Sapphire crystal||Sapphire crystal correct date magnification||Sapphire crystal||Mineral Glass|
|Logo & Markings||laser etchings||Exact on entire watch||90% Exact on entire watch||70% Exact on entire watch|
|Dial||Genuine Rolex||Exact detail and font||90% exact detail and font||70% Exact detail and font|
|Luminous Markers||Rolex Lumen||SuperLuminova Swiss Lumen||Swiss Lumen||Normal Lumen|
|Waterproof||100m on standard models||Tested up to 300m||Tested up to 30m||Life waterproof|
|Life expectancy||Lifetime||Lifetime||3-5 years||1-2 years|
|Warranty||2 Years||Up to 5 Years||Up to 3 Years||Up to 1 Years|
Band Material: 316L. The watch band is made of 316L, which helps to form an anti-corrosion film on the surface of the metal material.
Watch Case: 316L. The case is made of 316L steel, the hardest material, which is a very strong and corrosion-resistant steel. It has the same strength as the most popular grades (HRC52, HRC55), but only half the weight. Compared with competitors, the production cost of stainless steel is also higher.
Case Back: Solid. xxxxx often uses a solid bottom cover, which is the “second skin” of the watch. It covers metal and provides daily wear protection for the watch.
Crystal: Sapphire Crystal. Sapphire glass has high-quality optical materials and is often used in the manufacture of watches. The unique anti-reflective coating can provide scratch resistance without affecting its gloss. Tips: The A Replica is applied with mineral glass instead of sapphire.
Second Markers: Minute Markers around the outer rim. The design of the dial is as shown in the picture above, with minute markers on the outer edge.
Dial Markers: luminous dot. The watch has a luminous point, which is a new type of sensor that can detect time in the dark. When receiving a signal from an external source, this point will light up. It then sends a signal to the computing device, telling it when to turn the lights on and off.
Luminiscence: Hands and Markers. As for the watch’s luminiscence, it is hands and markers. With this watch, you will not waste time to check the real-time.
Bezel Material: Stainless Steel. The watch uses a high-end stainless steel bezel, which made of stainless steel bezel material. It needs to be durable and can resist abrasion. The design of stainless steel bezel material makes it suitable for the watch bezel because of its ability to withstand a lot of pressure and friction.
Clasp: Fold Over Clasp. The combination of a watch case and a bracelet watch to make it easier and quicker for the user to open and fold the case over to keep it secure.
Water Resistance: 30 meters. Want a watch waterproof? Don’t hesitate to choose us, the depth of the watch is 30 meters. But please make sure you close the crown properly. Tips: The A Replica is just daily waterproof, need to purchase additional waterproof service which is up to 30 meters.
Function: Date, Hour, Minute, Second. The watch is a very important instrument in everyone’s life, with a second hand, a minute hand and an hour hand at the same time.